TUES CF Framekit
YT TAILOR MADE
Dank der 5 erhältlichen Größen und der über alle Größen hinweg geringen Sitzrohrhöhen können Fahrer für ihre Körpergröße zwischen 2 bis maximal 3 Größen wählen. So kannst du von moderat bis extra lang genau den Reach auswählen, den du fahren willst. Dein Rahmen passt dir immer wie maßgeschneidert.
Das steckt dahinter. Ein größerer Reach erlaubt es versierten Fahrern, für viel Grip und Geschwindigkeit die Lastverteilung genau auf die Fahrsituation anzupassen. Mit dem Standard Reach bekommst du dagegen mehr Pop und Agilität. Allerdings solltest du auch versiert sein, um die richtige Wahl zu treffen: Bist du dir nicht sicher, empfehlen wir dir immer möglichst in der Mitte des für dich empfohlenen Bereichs zu bleiben.
The new generation of the double overall World Cup winner – developed on the race track. Two years of World Cup racing feedback, suspension kinematics developed with Aaron Gwin and the MOB, as well as a modern geometry concept that lets you choose your reach all contribute to once again making sure that the TUES has precisely the characteristics that form a winner.
Feedback from our Rampage superstars Cam Zink and Andreu Lacondeguy has also allowed us to create a bike that will continue to push the limits of freeriding well into the future.
The frame’s stiffness, the low center of gravity and the highly capable suspension come together to create the perfect machine for bike parks, rough trails, and high speed descents – the TUES is a bike you will immediately feel at home on.
Unrivalled traction, unlimited reserves of travel and a well-defined pop – the new TUES is a rare breed of animal, capable of combining active control and agility whether on the ground or in the air.
The frame. While designing the TUES we paid particular attention to synchronizing every suspension element to work together as one: frame kinematics, hydraulic damping curves, and spring force. The Virtual 4 Link suspension system is based on a low leverage ratio – and it's a major factor in giving the TUES its superior characteristics. A rapidly rising spring curve provides a lot of midstroke support: this creates more grip for turning and braking, and optimal use of travel on big jumps. Despite being very sensitive off the top, the progressiveness and support gives the TUES the pop to get airborne easily – and helps keep your legs fresh during sprints, too.
|Shock length (eye to eye)||267mm|
|Rear axle||12 x 150|
|Bottom bracket||Press Fit 30|
Our focus in the development process has always been to create the perfect weight distribution and optimal rider position. Thanks to its low center of gravity and the size-specific chainstay lengths it is easy to point the TUES where you want to go: you feel centered in the bike and ready to load up the tires while hitting berms. The slack headangle and the generous reach keep you in control on any track even at high speed, while the progressivity of the suspension will get you truly hooked on airtime. With this pinpoint balance of agility, control, and stability, the TUES has what it takes to inspire you – just like it did Aaron and Andreu.
For 2018, YT Tailor Made is taking things a step further. Thanks to the 5 available sizes and the low seat tube heights across the whole TUES range, riders can choose between 2 to a maximum of 3 sizes that match their body dimensions.
This allows you to choose exactly the reach that you prefer to ride, from strictly moderate to extra-long. It's like your bike was tailormade for you.
To point out the obvious: The following measurements and angles only apply to builds featuring parts corresponding to our original specifications.
|A Toptube length||584 mm||606 mm||633 mm||659 mm||682 mm|
|B Reach||410 mm||429 mm||452 mm||474 mm||495 mm|
|C Stack||601 mm||605 mm||614 mm||621 mm||636 mm|
|D Seattube length||400 mm||400 mm||400 mm||420 mm||420 mm|
|E Chainstay length||435 mm||435 mm||435 mm||440 mm||440 mm|
|F Headtube angle||63,5 °||63,5 °||63,5 °||63,5 °||63,5 °|
|G Seattube angle (eff.)||73,5 °||73,5 °||73,5 °||73,5 °||73,5 °|
|H BB Drop||7 mm||7 mm||7 mm||7 mm||7 mm|
|I Wheelbase||1199 mm||1220 mm||1248 mm||1278 mm||1302 mm|
|J Headtube length||100 mm||105 mm||115 mm||123 mm||129 mm|
|K BB height||351 mm||351 mm||351 mm||351 mm||351 mm|
|L Standover height||707 mm||709 mm||714 mm||723 mm||727 mm|